Clark Masts Phase 2 SERIES
Portable Masts
Clark Masts Air-operated logo
Australian Distributors: Portable Masts Australia Pty Ltd - Contact Details

Clark Masts Phase 2 series portable masts include the PT, YT, WT and XT range. All of these Clark Masts portable masts incorporate the same rugged design features as shown here, which help result in their High Reliability, Low Maintenance, and Cost Effectiveness for all appropriate applications.

PT Series
Original air-operated telescopic
Clark mast:
4.5 Inch base tube.

WT Series
Heavy duty masts for heavy
Antennas:
6 Inch base tube.

XT Series
The heavy-weight of the
range:
8 Inch base tube.

YT Series
A special addition to the
range:
5 Inch base tube.

OVER 50 YEARS OF DESIGN EXPERIENCE GOES INTO EVERY CLARK MASTS 
PORTABLE AIR-OPERATED MAST
Clark Masts Phase 2 Portable Mast Features Clark Masts Phase 2 Portable Mast Design Features

 

- CLARK MASTS TELESCOPIC PORTABLE PNEUMATIC MASTS -
 QUALITY ENGINEERED FOR MORE THAN 50 YEARS.
ALWAYS AHEAD IN DETAIL DESIGN AND PERFORMANCE.

The advantages of using low pressure air to extend a telescopic portable mast are well known. Clark Masts Phase 2 portable masts have all of these advantages including simplicity of construction minimising maintenance, smooth operation up and down, are simple to install, have low roof protrusion when vehicle mounted, are intrinsically safe, and are torsionally extra stiff when fully extended. Clark Masts large number of different Phase 2 masts means that there should be a mast to suit your application. Some of these applications include their use as Aerial Photography Masts, Security Camera Masts, Photo Masts, DGPS Masts, Survey Masts, Pump Up Masts, Portable Towers, Pneumatic Masts, Emergency Masts, Lighting Masts, Meteorological Masts, Instrument Masts, Radio Masts, Emergency Services Masts, Vehicle Mounted Masts, Trailer Mounted Masts, Portable Poles, SES Masts, CFA Masts, CFS Masts, Fire and Rescue Masts, Air Operated Masts, Communications Masts, Cellular Masts, Radio Survey Masts, Police Masts, ILS Masts, Fire Brigade Masts, Microwave Masts, Outside Broadcast Masts, Surveillance Masts, Telescopic Masts, Military Masts and Alloy Masts.

As Clark Masts Phase 2 portable mast performance also depends on the installation accessories, Clark Masts have designed their accessories for maximum performance. A wide range of Air Sources and portable mast controllers is also available. The four Phase 2 portable mast series are unified into one broad family spanning heights from 3 to 30 metres, and headload capacities from 5 to 150 Kg (300 Kg on special order).

Whether deployed directly in the field or mounted in or on a vehicle or shelter, Clark Masts Phase 2 portable mast models provide the performance required at generally the lowest total cost. Longevity has always been a design criteria for Clark Masts. Many customers still operate masts 30-40 years old and keep them in perfect order with readily available spare parts when necessary. Portable Masts Australia Pty Ltd operate a service/spare parts centre in Melbourne, Australia for all Clark Masts portable masts, including the Phase 2 Series.

Clark Masts Phase 2 Portable Mast In Service

Clark Masts Phase 2 Portable Mast Mobile Mounts

BRIEF CLARK MASTS 
PHASE 2 PORTABLE MAST SPECIFICATIONS

Telescoping sections:
High strength Corrosion-resistant Aluminium Alloy.

Surface Finish:
Anodised natural colour or dyed.

General Finish:
Standard paint colour - white or NATO green. Other colours, including
desert sand, to order.

Maximum Operating Air Pressure:
1.7 bar (25 psi or 1.8 Kg/cm sq.).

Operating Temperature:
+55 degrees to -40 degrees C (dry).

Storage Temperature:
+65 degrees to -55 degrees C (dry).

Icing Risk:
Similar to any other mechanical device in conditions of temperature
change between +3 and -5 degrees C. Without precautions 5%. With
precautions <1%.

Air Leakage:
Expected pressure drop: Zero to 0.4 bar (0 to 6 psi).

Environmental Conditions:
Clark Masts portable masts have been tested extensively in nature's test house for
Tropical Life, Salt Atmosphere, Dry Heat, Damp Heat, Driving Rain,
Shock, Vibration as well as High and Low Temperatures. Further
more, by following simple procedure there are no limitations for
transport in un-pressurised aircraft.

Quality Assurance Standards:
AQAP 120 including ISO 9002.

 

CLARK MASTS PHASE 2 PORTABLE MAST 
SPECIFICATIONS AT A GLANCE

Clark Masts MT Portable Mast Series

 

 

Clark Masts YT Portable Mast Series

Clark Masts PT Portable Mast SeriesClark Masts PT Portable Mast Series

Clark Masts WT Portable Mast Series Clark Masts XT Portable Mast Series

Go to PT Mast Series, WT Mast Series, XT Mast Series, YT Mast Series
Clark Mast General Accessories
Clark Mast Air Supply Accessories
Clark Mast
Mounting and Guying Information
Back to Contents Page
General Clark Mast Details
Go to PMA
Home Page 
Clark Masts - Teklite
Home Page 
Web Article on "The History Of Clark Masts".

Quick Jump Index to various Clark Mast portable masting Series
QT Series FT Series ST Series DAF Field Mast Series Air Supply Equipment
PT Series YT Series WT Series XT Series 802 Trailer Mounted Series
804 Heavy Duty Trailer Mounted Series Mast Accessories Defence Force Range Clark Teklite Portable Lighting Range Contents Page

General Clark Mast Details & Model Listing
Go to Portable Masts Australia Pty Ltd
Home Page 
Web Article on "The History Of Clark Masts".

Phone: +61 402130692
Mob: 0402130692

For full Technical details and pricing E-mail Portable Masts Australia Pty Ltd

This page was last updated 14-01-2017


Copyright © PORTABLE MASTS AUSTRALIA PTY LTD 2017 - All rights reserved.


All materials contained in the site www.portablemasts.com.au/ are protected by copyright and shall not be used for any purpose other than private, non-commercial viewing purposes. Derivative works and other unauthorized copying or use of stills, audio and video footage are expressly prohibited.