Clark Masts 802 SERIES Trailer Mounted Portable Masts

802 TRAILER MOUNTED SERIES

CLARK MASTS TRAILER MOUNTED PORTABLE
MASTS - ALTERNATIVE TO VEHICLE MOUNTING

Clark Masts 802 Series trailer mounted portable mast drawing

Errecting a Clark Masts 802 trailer mounted portable mast

Photos above graphically illustrate how easy the
Clark Masts 802 series trailer masts erect

A trailer mounted portable mast has all the advantages of a vehicle mounted portable mast plus more. It is independent of the vehicle used to tow it and when in use in one place for a period of time there is no loss of vehicle use. Also the life of a Clark Mast is usually longer than that of the vehicle in which it may have been built, so no costly refits are necessary.

UP TO 30 METRES
Clark Masts Model 802 Trailer Portable Mast series, based on Clark Masts WT Portable Mast Series, are a boon to all those who need to lift an antenna or other light apparatus up to a height of 30 metres, for a short duration of time, with a minimum of physical work and manpower. One person can set up and extend the mast practically anywhere. The weight of approximately 500 Kg enables the trailer mast to be towed by any medium size car.

The Clark Masts Model 802 Trailer Portable Mast Series is based on a two-wheel trailer specially designed for its work. Many details were incorporated during development to make operation simple, easy and safe. The air pressure for mast extension is provided by a petrol engine driven compressor. Where preferred however, a 24/12 volts DC or 240 volts AC electric motor may be specified in place of the petrol engine.

The trailer chassis may be fitted with several optional items including large equipment boxes, spare wheel and operator platform to enable headloads to be easily placed on the retracted portable mast.

Clark Masts 802 Trailer Portable Mast Dimensions

Note that the 802 Trailer Portable Mast Series is also available in a 15 metre version with 55Kg headload capability, the Model 802/15, P/N 18698. For full technical details on this model contact GFS Electronics.

Clark Masts 802 Trailer Mounted Portable Mast Specifications

Next section, 804 Heavy Duty Trailer Series
Back to Contents Page
Go to GFS Home Page
Clark Masts Home Page

Quick Jump Index to various Clark Mast portable masting Series
QT Series	FT Series	ST Series	DAF Field Mast Series	Air Supply Equipment
PT Series	YT Series	WT Series	XT Series	802 Trailer Mounted Series
804 Heavy Duty Trailer Mounted Series	Mast Accessories	Defence Force Range	Clark Teklite Portable Lighting Range	Contents Page

E-mail GFS Electronics

Clark Masts Australian/Asia-Pacific factory distributors & service agents: GFS ELECTRONICS, PO Box 97, Mitcham, Victoria, 3132, Australia. 196 Jumping Creek Road, Wonga Park, Victoria, 3115, Australia. Phone +61 3 97222206 Fax +61 3 97222405

General Clark Mast Details
Go to GFS Electronics Home Page
Debeglass NON-CONDUCTIVE GUY WIRE
Web Article on "The History Of Clark Masts".
GFS Electronics Logo

Phone: 61 3 97222206
Fax: 61 3 97222405

This page was last updated 30/12/2009

All materials contained in the site www.portablemasts.com.au/ are protected by copyright and shall not be used for any purpose other than private, non-commercial viewing purposes. Derivative works and other unauthorized copying or use of stills, audio and video footage are expressly prohibited.