DEBEGLASS - TERMINATION OPTIONS

 

Method 1 - Terminating using a Debegrip Kit
Debegrip Terminator - Debegrip-6
By far the quickest and most convenient method of terminating Debeglass is to use a
Debegrip Terminator Kit. This method is suitable for all six sizes of Debeglass. All that is required
to perform a termination, beside the Debegrip Kit, is a small adjustable spanner. Shown
above is a Debegrip terminating a length of DB-5, 5 mm Debeglass.


 
Details of Method 1 - Using
Debegrip Stainless Steel Kit.
Alternate Debeglass Termination Method 3
The above illustrated method of termination, using
a Debegrip Terminator Kit , provides the user with
60 - 65% of the Debeglass's yeild tensile strength.


 

Method 2 - Using Glue & Binding
with Nylon Line plus Heatshrink
Alternate Debeglass Termination Method 2
The above illustrated method of termination provides the user with
95 - 100% of the Debeglass's yeild tensile strength.

 

Model DB-4 DB-5 DB-6 DB-8 DB-10 DB-12
Outside diameter 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm
Core diameter (mm) 2.5 3.0 4.0 6.0 8.0 10.0
Weight of one
meter (grams)
20 32 44 75 110 160
Tensile strength
- yield (kg)
430 620 970 1710 2470 3420

Debeglass Technical Specifications shown HERE
Details on calculating Debeglass required guywire tensile strength shown HERE

General Clark Mast Details
Go to Portable Masts Australia Pty Ltd
Home Page
PMA Contact Details
Web Article on "The History Of Clark Masts".


Phone: +61 402130692
Mob: 0402130692
E-mail Portable Masts Australia Pty Ltd

This page was last updated 14-01-2017


Copyright © PORTABLE MASTS AUSTRALIA PTY LTD 2017 - All rights reserved.


All materials contained in the site www.portablemasts.com.au/ are protected by copyright and shall not be used for any purpose other than private, non-commercial viewing purposes. Derivative works and other unauthorized copying or use of stills, audio and video footage are expressly prohibited.