Broad Spectrum Car Audio Powerline Cleanser
- Model CL-1
The CL-1 is designed to provide
transient, surge, RFI, EMI, alternator noise and voltage spike
suppression to your quality top-end car audio/video system. It
will not only protect your valuable equipment from the damaging
effects of voltage spikes and surges, but also has the potential
to give a greater sharpness to high frequency reproduction by
preventing external source generated intermodulation distortion
occurring through removal of distortion causing signals from the
audio/video equipment's power line.
| CL-1 TECHNICAL SPECIFICATIONS* |
| Configuration |
1 Filter/Suppressor, 1 output. |
| Ignition Switch Control |
CL-1 output is switched via an internal
(ignition switch controlled) relay. |
| Voltage
Rating |
12V Volts DC +/- 15% (Absolute Maximum 13.8 Volts).** |
| Reverse Polarity Protection |
Protection Diode |
| Current
Rating @ 40 Degrees C. |
10 Amps. |
| Protection Stages |
Two: Low Pass Filter / TVS. |
| Filter Configuration |
Inductance-Capacitance Pi Section. |
| Filter Attenuation |
Typically 17 dB @ 10 Hz, 35 dB @ 100 Hz, 42 dB @
1 KHz, 48 dB 10 KHz to 100 MHz. |
| TVS Configuration |
Semiconductor. |
| TVS Frequency Response |
Typically DC to 1 GHz @ >18 Volts. |
| TVS Transient Power Rating |
100 Kilowatt for 0.1 Microsecond. |
| TVS Surge Power Rating |
1.5
Kilowatt for 1 Millisecond. |
| TVS Clamping Response Time |
<1 Picosecond. |
| TVS Clamping Voltage |
18 Volts, DC. |
| Input Connector |
4 Way Screw Terminal Block, M4 Screws. |
| Output Connector |
4 Way Screw Terminal Block, M4 Screws. |
| Mounting |
Two M6 mounting holes provided. |
| Housing |
Aluminium enclosure. Finished in Grey RAL7001
paint. |
| Dimensions |
115 x 64 x 35 mm. |
| Operating Temperature Range |
-40 to +85 Degrees C. |
| Storage Temperature
Range |
-55 to +125 Degrees C. |
| Environmental |
IP65 rated against moisture ingress. |
** Note that a
24 Volt version is available on special order.
*GFS Electronics reserve the right to change specifications without notice.
CL-1 Price (FOB in Australian
Dollars)
AU$590 + freight
GFS
Electronics accepts both Visa and Master Card. |
For more
information, including availability & quantity pricing, E-mail
GFS
Electronics.
The Cleanline CL-1 is engineered & manufactured in Australia
by GFS Electronics.
E-mail
information is available from GFS Electronics, E-mail gfs@alphalink.com.au, Ph 61 3 97222206 Fax 61 3 97222405.
Go to GFS
HOME PAGE
Go to CLARK
MASTS TEKLITE HOME PAGE
Go to MASTSYSTEM MASTS CATALOGUE
This page was last updated 30/12/2009
Email GFS:
sales@clarkmasts.net.au
Phone: 61 3 97222206
Fax: 61 3 97222405
Copyright © GFS ELECTRONICS
2010 - All rights reserved.
All materials
contained in the site home.alphalink.com.au/~gfs/ are protected by
copyright and shall not be used for any purpose other than
private, noncommercial viewing purposes. Derivative works and
other unauthorized copying or use of stills, audio and video
footage are expressly prohibited.